VR2R-0532
① SA Source
- Source: 開啟完整 SA 文章
- Section:
Bi-directional SerDes for Scale-Up - Line hint:
659
Context Before
In optics, bidirectional interconnect can be achieved by integrating an optical circulator to a transceiver as discussed in our TPUv7 article ↗ published late last year. The circulator works by routing the inbound and outbound signal onto separate paths ↗, ensuring no overlaps between both at the photodiode receiver. Bidirectional interconnect is, however, much trickier in the copper domain. A circulator cannot be used as copper cables are linear transmission lines, which means that the inbound and outbound signals will be summed at the receiver through superposition. The receiver at each end of the copper wire therefore needs a mechanism to separate the local TX from the local RX.
The solution to this problem is the use of a hybrid at each end of the wire. Without a hybrid, there will be self-interference at the local RX because both the local TX and local RX are being transmitted along the same wire:
Evidence
B0+A0=BA0
Context After
An inverted copy of the local TX must therefore be generated at the local RX for proper echo cancellation:
B0+A0=BA0+(−A0)=B0
② Atomic Claim
In the source echo-cancellation notation, the superposed signal is B0 + A0 = BA0.
- Epistemic Mode:
ASSERTED - Mapping Status:
COMPLETE
③ Semantic Frame
{
"attribute": "SOURCE_SUPERPOSITION_NOTATION",
"context_nodes": [],
"entity": {
"id": "04_knowledge_base/Echo cancellation",
"label": "Echo cancellation"
},
"frame_type": "ATTRIBUTE",
"qualifiers": {
"condition_text": null,
"numeric_mentions": [],
"temporal_mentions": []
},
"value": {
"numeric_mentions": [],
"value_text": "In the source echo-cancellation notation, the superposed signal is B0 + A0 = BA0."
}
}④ Canonical Entity Mapping
| Role | Surface Label | Canonical Target |
|---|---|---|
| entity | Echo cancellation | 04_knowledge_base/Echo cancellation |
⑤ V2 Draft（需要修正時直接編輯）
Inline repair
只編輯以下三個 Draft 區塊。完成後將
review_action設為REQUEST_REPAIR，再手動執行 Repair Preview。
執行腳本前，Draft 不會寫入 Claim Store 或 Graph。
V2 Atomic Claim Draft
In the source echo-cancellation notation, the superposed signal is B0 + A0 = BA0.
V2 Semantic Frame Draft
{
"attribute": "SOURCE_SUPERPOSITION_NOTATION",
"context_nodes": [],
"entity": {
"id": "04_knowledge_base/Echo cancellation",
"label": "Echo cancellation"
},
"frame_type": "ATTRIBUTE",
"qualifiers": {
"condition_text": null,
"numeric_mentions": [],
"temporal_mentions": []
},
"value": {
"numeric_mentions": [],
"value_text": "In the source echo-cancellation notation, the superposed signal is B0 + A0 = BA0."
}
}V2 Revision Metadata Draft
{
"epistemic_mode": "ASSERTED",
"mapping_status": "COMPLETE"
}⑥ Human Review
請在 Properties 逐項確認：
- 原文 → Atomic Claim 是否忠實
- Atomic Claim → Semantic Frame 是否忠實
- Canonical Entity mapping 是否正確
- Epistemic mode 是否保留原文語氣
- 最後選擇
review_action
Review state
Markdown 內文不是正式 approval。只有 Apply bridge 寫入的 Decision Ledger event 才是正式決策。