VR2R-0312
① SA Source
- Source: 開啟完整 SA 文章
- Section:
PCB vs Flyover Cables - Line hint:
435
Context Before
Conductor loss is driven by copper surface roughness. As signals travel down the copper traces in the PCB, energy is lost due to the resistance in copper. At higher frequencies, the signal traveling through the copper crowds toward the surface of the trace, which is known as the skin effect. On top of the natural resistance of copper, if the surface is rough, the current will not travel along a uniform path incurring more resistance and loss.
Dielectric loss is driven by the energy absorption nature of the dielectric materials. Dielectric materials, resins and glass fiber cloth, provide insulation and mechanical reinforcement function for the PCB traces. At high frequency, high-speed signal doesn’t simply travel through the copper traces, the signal traves as an electromagnetic wave with electric field extending into the dielectric materials. As the signal propagates, the dielectric absorbs a portion of the energy and dissipates as heat, contributing to insertion loss. Dielectric loss scales with frequency, hence dielectric loss is a dominant limiter of signal performance of long reach PCB traces.
Evidence
Geometry loss describes the insertion loss incurred from abrupt structures of the PCB traces. Real PCB channels include many abrupt structures, such as vias and layer swaps. These are like bumps in a highway, and signals could reflect backward and be interrupted increasing insertion loss.
Context After
Another factor that affects signal performance is cross-talk. Given the increase in the number of I/Os per GPU, lane density in the PCB also increases. Cross-talk describes the scenario where the copper traces are too close to each other and the signal from one lane affects the signal in a neighboring lane. Some copper traces are designed for power as well. When the power lanes are too close to the signal lanes, noise from the power lanes can also modulate the signal as well.
In conclusion, insertion loss scales with signal frequency, and high-speed signal suffers more insertion loss from PCB than from fly over cables. Hence, as traditional CPU servers upgrade to higher signaling frequencies such as upgrading to newer PCIe generations, the CPU server design increases the adoption of fly over cables to compensate for insertion loss from the PCB. The alternative solution would be upgrading PCB materials, however, fly over cables are more cost effective and remain feasible for traditional server applications.
② Atomic Claim
實際的 PCB channels 含有許多 abrupt structures，例如 vias 與 layer swaps。
- Epistemic Mode:
ASSERTED - Mapping Status:
COMPLETE
③ Semantic Frame
{
"attribute": "CHANNEL_ABRUPT_STRUCTURES",
"context_nodes": [],
"entity": {
"id": "04_knowledge_base/PCB",
"label": "PCB"
},
"frame_type": "ATTRIBUTE",
"qualifiers": {
"condition_text": null,
"numeric_mentions": [],
"temporal_mentions": []
},
"value": {
"numeric_mentions": [],
"value_text": "real PCB channels contain abrupt structures such as vias and layer swaps."
}
}④ Canonical Entity Mapping
| Role | Surface Label | Canonical Target |
|---|---|---|
| entity | PCB | PCB |
⑤ V2 Draft（需要修正時直接編輯）
Inline repair
只編輯以下三個 Draft 區塊。完成後將
review_action設為REQUEST_REPAIR，再手動執行 Repair Preview。
執行腳本前，Draft 不會寫入 Claim Store 或 Graph。
V2 Atomic Claim Draft
實際的 PCB channels 含有許多 abrupt structures，例如 vias 與 layer swaps。
V2 Semantic Frame Draft
{
"attribute": "CHANNEL_ABRUPT_STRUCTURES",
"context_nodes": [],
"entity": {
"id": "04_knowledge_base/PCB",
"label": "PCB"
},
"frame_type": "ATTRIBUTE",
"qualifiers": {
"condition_text": null,
"numeric_mentions": [],
"temporal_mentions": []
},
"value": {
"numeric_mentions": [],
"value_text": "real PCB channels contain abrupt structures such as vias and layer swaps."
}
}V2 Revision Metadata Draft
{
"epistemic_mode": "ASSERTED",
"mapping_status": "COMPLETE"
}⑥ Human Review
請在 Properties 逐項確認：
- 原文 → Atomic Claim 是否忠實
- Atomic Claim → Semantic Frame 是否忠實
- Canonical Entity mapping 是否正確
- Epistemic mode 是否保留原文語氣
- 最後選擇
review_action
Review state
Markdown 內文不是正式 approval。只有 Apply bridge 寫入的 Decision Ledger event 才是正式決策。